Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

MBbiz.ca | our mission is to.. view more

Richeer 4 PCS Hub Centric 5x5.5 Wheel Spacers for 2012-2018 Ram 1500, 1.5 inch 5x139.7mm Wheel Spacers with Studs M14X1.5 Center Bore 77.8mm

1496-c3
Hover on image to enlarge
In stock
$79.99
You save: $80.91 (50%)
+
We sell Amazon returns.   Boxes will always be open, and occasionally there ...
+1(431)205-1919
Contact shop
Description

  • 4PCS 1.5" (38.1mm) Thickness | 5x5.5"(5x139.7mm) Vehicle Bolt Pattern | 5x5.5"(5x139.7mm) Wheel bolt pattern | 77.8mm Center Bore | 14x1.5 Threaded Studs/Nuts.
  • PACKAGE INCLUDES:4 x hubcentric wheel spacers (1.5" per unit),2x high strength thread-locking (red),2x user manual.
  • APPLICATIONS: 2012-2018 Ram 1500.
  • BENEFITS: (I) CNC automatic processing ensure high accuracy and stability(0.02mm) (II)6061-T6 aluminum forged alloy material. (III)High-quality pre-installed heat-treated 12.9-grade studs.

111

.00

1

Wheel Spacer Specifications
  • Quantity: Four (4)
  • Thickness: 2" (38.1mm)
  • Bolt Pattern: 5x5.5(5x139.7mm)
  • Center Bore: 77.8mm
  • Stud/Nut Thread Pitch: M14x1.5

Compatible with:

  • 2012-2018 Ram 1500

1

BENEFITS:

  • Positions your wheels 1.5 inches outward
  • Allows installation of wider wheels & tires
  • Increases your vehicle's track-width
  • Hydraulic Pre-Pressed Studs eliminate the risk of vibrations
  • Improves the look of your vehicle

1

1

 2

2

 3

3

 4

4

Installation Procedure

1

2

3

Step 1:

  • Following your vehicle owner's manual, properly raise the vehicle and support it using adequately load-rated jack stands.
  • Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
  • Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstructions which could prevent proper seating of the spacer/adapter.

Step 2:

  • If proper seating can be achieved, apply provided thread locker to the vehicle's studs and mount the wheel spacers onto the rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • Install wheel onto wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • DO NOT USE AN IMPACT WRENCH.

Step 3:

  • Check that wheel and tire clearance allow for full steering(lock-to-lock).
  • If there is no interference, the vehicle may be lowered.
  • Re-check torque after travelling the first 50-100 miles, then again every 2000-3000 miles.

88

98

>td >1.5 inch

175032472925012
Wheel Spacers for DodgeWheel Spacers for Ram 1500Wheel Spacers for Ram 1500 Ford
Quantity:4 PCS4 PCS4 PCS
2 inch2 inch
Bolt Pattern:5x5.5(5x139.7mm)5x5.5(5x139.7mm)5x5.5(5x139.7mm)
Stud/Nut Thread Pitch:M9/16-1814x1.51/2-20
Hub Centric:YesNoNo
Centerbore:77.8mm108mm108mm
Reviews

No posts found

Write a review